
1. Email Low Cost Digitizing with your camera ready artwork in a .jpeg format.
2. Provide job requirements:
A.) T-shirt, Polo Shirt, Sweater, Jacket, Jeans, Caps, Bags & Others
B.) The fabric material is woven fabric, knit, mesh or others
C.) Your preference: Low, normal or high density in your design.
D.) Approximate size of finished design.
E.) Number of colors in the design.
F.) Placement: Left chest, jacket back, etc.
G.) Request Disk
format: Home or Commercial embroidery formation:
.dst - tajima, .dsb - barudan, .zsk
-zsk, .exp-melco, .10o toyota,
xxx- compucon/singer, .hus-husqvarna,
. pcs-Paff, .pes-brother vs,
.pec-brother, .sew- janome.
3. Low Cost Digitizing's quote will be emailed in one full day.
4. Review and approve the quote before making payment.
5. Your finished design will be e-mailed within 2 - 3 days.
Digitizing and/or punching is the process of
converting artwork designs into a digital
embroidery designs.
This pattern is read by embroidering machines. Digitizing software
is used to achieve this process. Artwork is created in a drawing
format, vector format or scanned artwork from a picture. It
is saved in .jpeg format and converted to a digital embroidery
pattern.
The word punching is a term that comes from the jacquard embroidery machine process. These instructions come
from a tape punched with holes that tells the machine's frame how to
move and sew the embroidered design.
Today the process is different. A digitizer uses expensive software to plot each point on a computer or graphic tablet. The finished product is saved to a diskette for use with the embroidery machine.
Getting a logo designed can be very expensive. Low Cost Digitizing recommends searching the internet for art that can be incorporate into your logo. Some sites require you to subscribe, i.e., clipart.com others are totally free, www.free-clipart.net.
TrueSizer 9 is available FREE from this site.